Starlink Gen2
Starlink Gen2
Starlink Gen2 Replacement Cable
Factory-spec replacement / extension cable for Starlink Gen2 (V2) — 1 Gbps, weatherproof
From $21.99
USD · Free shipping over $99
A 1:1 replacement for the cable that ships with Starlink Gen2 (Standard Actuated) dishes. Built to the original supplier spec — 24 AWG CAT5e FTP, 8 conductors plus stranded tinned-copper drain wire, foil + mylar shielding, and IP65 over-moulded connectors. Six lengths cover everything from a tight roof-rack run to a long off-grid pole-mount.
Key Features
- Drop-in for Starlink Gen2 (Standard Actuated) dishes
- 24 AWG, CAT5e FTP, 1 Gbps to 46 m
- Foil + mylar + tinned-copper drain ground
- Outdoor PVC jacket — UV, water, and chafe resistant
- Six length options from 2 m to 46 m
- IP65 over-moulded connectors at both ends
Specifications
| Compatibility | Starlink Gen2 (Standard Actuated) |
| Conductors | 8× 24 AWG copper + drain wire |
| Shield | Aluminium foil + mylar |
| Bandwidth | 1 Gbps |
| IP rating | IP65 connectors |
| Warranty | 2 years |
What's in the Box
- 1× Cable in selected length
Frequently Asked Questions
Will this fit my Starlink Mini or Gen3?
No. Mini and Gen3 use a different connector set — see the Mini and Gen3 cable listings.
Can I bury this cable in conduit?
Yes. The PVC jacket is rated for direct burial in conduit; outside conduit we recommend a UV-resistant outer sheath for runs longer than 5 years.
Is it OK for marine use?
Yes — the connectors pass IP65 wash-down. For full salt-water immersion use a sealed deck pass-through and dielectric grease on the connector.
You might also like
Gen2 Roof Mount
No-drill roof mount for Starlink Gen2 dishes — fits RV, van, and box-truck roof profiles
$44.99
Starlink Gen2 Ethernet Adapter
Add a wired RJ45 port (or two) to your Starlink Gen2 — 1 Gbps, official-spec
$13.99
Starlink Gen2 to RJ45 Conversion Cable
Convert the Gen2 dish output directly to a standard RJ45 — no inline adapter required
$38.99