Starlink Gen2 Starlink Gen2

Starlink Gen2 Ethernet Adapter

Add a wired RJ45 port (or two) to your Starlink Gen2 — 1 Gbps, official-spec

From $13.99

USD · Free shipping over $99

Length / Variant

← Products

Standard Starlink Gen2 dishes don't expose an Ethernet port. This adapter inline-splits the dish-to-router cable and breaks out one or two RJ45 jacks at full 1 Gbps so you can wire in a switch, NAS, mesh node, or PoE camera. Four variants cover single-port, dual-port, low-profile, and a lightweight A/B router-side option.

Key Features

Adds 1× or 2× gigabit RJ45 to a stock Gen2 install
16-conductor 1 m breakout cable (26 AWG×8 + 30 AWG×8)
Foil + mylar shielded — no PoE noise into the data line
1 Gbps end-to-end — passes the full Starlink uplink
Plug-and-play — no firmware changes, no power input

Specifications

Compatibility	Starlink Gen2 (Standard Actuated)
Bandwidth	1 Gbps per port
Connector	RJ45 + Starlink proprietary (pass-through)
Cable	16-core 1 m, CAT5e FTP, 24 AWG
Power	Passive — no external supply
Warranty	2 years

What's in the Box

1× Adapter unit
1× Pass-through cable
1× Install card

Frequently Asked Questions

Do I lose Wi-Fi if I use this?

No. The adapter only breaks out RJ45 — your Starlink router keeps broadcasting Wi-Fi exactly as before.

Can I run PoE through it?

No. The line carries Starlink dish data + power; introducing 48 V PoE would damage the dish. Use a PoE injector after the adapter, on the LAN side only.

Will it work with the Mini?

No, Mini uses a different connector. The Gen3 4-Port adapter is the equivalent for Gen3 (also sold here).