


Starlink Gen1
Starlink Gen1 (legacy)
Enterprise
Starlink Gen1 Performance Replacement Cable
1 Gbps replacement cable for Starlink Gen1 dishes — same connectors, longer service life
From $25.99
USD · Free shipping over $99
A direct factory-spec replacement cable for the original Starlink Gen1 (round-dish) terminal. CAT5e foil-shielded, 24 AWG, with the same Starlink-proprietary connectors at both ends so it drops in without any adapter. Dual layer of mylar + aluminium foil + ground wire keeps signal stable to 1 Gbps over the full length. Available in 8 lengths so you don't have to coil 30 m of slack at the dish.
Key Features
- 24 AWG CAT5e — foil + mylar shielded for 1 Gbps stability
- Same Starlink Gen1 proprietary connectors at both ends — drop-in replacement
- 8 length options from 2 m up to 46 m
- PVC outdoor jacket — UV and weather resistant
- Drain-wire ground for noise rejection
- Engineered to factory spec, 1:1 fitment
Specifications
| Compatibility | Starlink Gen1 (legacy round dish only) |
| Conductors | 8× 24 AWG copper + drain wire |
| Shield | Aluminium foil + mylar |
| Bandwidth | 1 Gbps |
| Jacket | PVC, outdoor-grade |
| IP rating | IP65 connector |
| Warranty | 2 years |
What's in the Box
- 1× Replacement cable in selected length
- 1× Cable label / install card
Frequently Asked Questions
Is this for the original round-dish Starlink?
Yes — this is a 1:1 fit for the first-generation Starlink terminal (the round, motorised dish). It does not fit Starlink Gen 2/V2, Gen 3/V3, or Mini, all of which use different connectors.
Why replace the original cable?
Three reasons: rodent damage, UV degradation of the original PVC after 3+ summers, and the desire for a different length. We sell 8 lengths so you don't have to bury 30 m of slack.
Does it really do 1 Gbps?
Yes, end-to-end, even at 46 m. The conductors are 24 AWG with full foil + mylar shielding, well inside the loss budget for CAT5e at gigabit.
You might also like
Starlink Mini Magnetic Car Mount
Drop-in N52 magnetic mount — 100 lb hold on any steel-roof vehicle, 60-second install
$38.99
Starlink Mini Suction-Cup Marine Mount
Marine-grade quad suction-cup mount — 720-hour salt-spray tested, 120 km/h wind rating
$44.99
Starlink Mini Roof Pipe-Clamp Mount
Aluminium pipe-clamp mount sized for the Starlink Mini — perfect for RV ladder rails and roof bars
$27.99